Download and Install MediaTek USB VCOM Drivers

Here is how you can download MediaTek USB VCOM drivers for your phone. Available as MT65xx preloader and MT67xx preloader drivers, installing these MediaTek USB drivers on your phone will ensure correct USB data transfers, proper recognition by your computer of your phone, and also, allow you to run programs such as SP Flash Tool and more.

Depending upon whether you need an MT65xx driver or an MT67xx driver, we have all MediaTek VCOM drivers listed ahead. You can check your phone specs to see what MTK processor it uses.

Automatic/Direct Installation

Filename: MediaTek_Preloader_USB_VCOM_Drivers_Setup_Signed.zip
File size: 8.85 MB
Uploaded on: September 25, 2020
Download link: Click here to download

Manual Installation

Filename: MediaTek_Preloader_USB_VCOM_Drivers.zip
File size: 8.39 MB
Uploaded on: September 25, 2020
Download link: Click here to download

MediaTek processors have been gaining traction over the past couple of years. Found on a variety of devices, the MT65xx and MT67xx series provide good performance and have great value.

If you own a MediaTek phone, you would need to install MediaTek VCOM drivers to connect your phone with a Windows PC. In most cases, you will need these drivers when trying to flash firmware files, installing a custom ROM, or TWRP recovery.

Listed below are the relevant MTK drivers you will need, depending on the type of MediaTek chipset you have.

How to Install MediaTek MT65xx / MT67xx Preloader USB VCOM Drivers

The steps below can be applied to any PC running Windows XP, Windows 7 / 8 / 10, and up. However, for Windows 8 and newer, you need to disable Driver Signature Verification.

There are plenty of guides online showing you how to disable digital Driver Signature Verification so you can use them before you proceed to install this driver package.

NOTE: At this point, you should have already disabled digital Driver Signature Verification if you are running Windows 10, Windows 8 or 7, or anything newer.

Step 1 – Download MediaTek USB VCOM drivers from the links above (and below) and extract them.

Step 2 – You need to access Device Manager. Do so by right-clicking on My Computer and clicking on “Manage”. In the new window that pops up, select “Device Manager” from the menu shown on the left.

Step 3 – The computer you are using will be shown at the top with its name. Right-click on the name and select Add Legacy Hardware.

Step 4 – A new wizard will pop up. Just click on Next.

Step 5 – From the following menu choose the second option shown in the screenshot below and click Next.

Step 6 – You will be shown a long list in the following screen. Just select Show All Devices and click Next.

Step 7 – Click on Have Disk in the following window and select any .inf file you extracted in Step 1.

Step 8 – Once selected, click on Next. There will be a security warning on which you can select Install Anyway.

Step 9 – Restart your PC and connect your Mediatek MT65xx or MT67xx device.

That’s all to it! After you install the correct USB drivers for your MediaTek device, you can use different tools to flash different files and also stop worrying about failed data transfers.

 

Leave a Reply

Your email address will not be published.