Tecno Spark 7P Flashing Guide with SP Flash Tool

If you are trying to flash your Tecno Spark 7P device then I would like to suggest you try using the Smartphone flash tool (aka SP Flash Tool). SP flash tool is a great flashing tool for Android. This is the best application that mainly helps you to flash your smartphone.

You can use this tool to flash almost any MTK (MediaTek IC) based and stock ROM, also custom recovery fixing in some extreme cases like firmware update and download, unbrick bricked android device smartphone. Try flashing any custom ROMs, stock ROMs on your Tecno Spark 7P Android smartphone.

SP flash tool is the best firmware flashing tool available online whether it is custom ROM or stock ROM. Using SP Flash Tool, you can flash Tecno Spark 7P Android device (but make sure to check if it is based on Mediatek IC). Flash any custom or stock ROM over Tecno Spark 7P Android device. Also, do make sure that you have installed Tecno Spark 7P USB drivers properly on your PC before flashing any firmware file.

Find your Tecno Spark 7P USB drivers by using the search below:

You can download SP Flash Tool from our website downloading section. Also, you need to download the scatter file for your MB-based device.

Let me tell you what we can do with the SP Flash tool

  • 1. We can flash to android stock Rom
  • 2. Easily Flash custom ROM
  • 3. Application for fixing bricked or unbrick the device
  • 4. Easy to read, write parameters
  • 5. We can erase, formatting data, and reset your MTC based devices

Pre-requisites before flashing Tecno Spark 7P:

  • The battery should be charged up to 70%
  • Make sure you have Tecno Spark 7P’s USB cord available
  • Download and install SP Flash tool on PC
  • Since, SP flash tool we need to install MediaTek USB drivers
  • Download Tecno Spark 7P firmware file (Scatter file + files to be flashed)
  • Last but not the least, you need to take your device backup (for safety reasons)
  • Once you have all the things ready above, follow the rest of the flashing tutorial

Here are the Requirements For SP Flash Tool

  • 1. You have Pc or Laptop
  • 2. You need a USB data cable for the device
  • 3. Drivers download (MediaTek USB-VCOM drivers)
  • 4. Download Scatter files and files to be flashed
  • 5. Note Backup the device (forum.hovatek.com/thread-468.html)
  • 6. SP Flash Tool Download

Steps to flashing Tecno Spark 7P using SP flash tool

Follow the steps below to flash Tecno Spark 7P with the SP flash tool:

Tecno Spark 7 Flashing Guide with SP Flash Tool

Download and install spflashtool.exe:Download SP flash tool, spflashtool.exe 

Download flash recovery image:FLashing is not easy, it takes time and patience. To flash Tecno Spark 7P, make sure you have a flash recovery image ready for your device model. 

Load scatters file:Click Scatter Loading (Load Scatter file of Tecno Spark 7P). 

Uncheck all boxes :Now, you should uncheck all boxes from the SP flash tool 

Load Recovery Image:Tick-box, Go to / click RECOVERY box from list and load recovery image of your Tecno Spark 7P device (load image from the separate window –>open) 

Recovery box must be CHECKED:The recovery box is checked before you connect your Tecno Spark 7P, in the recovery image location (uncheck all other boxes) 

Turn off and connect Tecno Spark 7P with PC:Turn off Tecno Spark 7P and connect it with PC 

Click Download button:After connecting your device with a PC, just click the download button on top 

Step #9, click yes:If it asks click “yes” 

Congratulations:Congrats! You have successfully flashed your Tecno Spark 7P device 

Disclaimer: Please follow the flashing tutorials at your own risk.

Conclusion

If the SP flash tool prompts a green circle, you are done. Tecno Spark 7P has been flashed using the SP flash tool.

Leave a Reply

Your email address will not be published.