Xiaomi Redmi 9T Flashing Guide with SP Flash Tool

If you are trying to flash your Xiaomi Redmi 9T device then I would like to suggest you try using the Smartphone flash tool (aka SP Flash Tool). SP flash tool is a great flashing tool for Android. This is the best application that mainly helps you to flash your smartphone.

You can use this tool to flash almost any MTK (MediaTek IC) based and stock ROM, also custom recovery fixing in some extreme cases like firmware update and download, unbrick bricked android device smartphone. Try flashing any custom ROMs, and stock ROMs on your Xiaomi Redmi 9T Android smartphone.

Xiaomi Redmi 9T Flashing Guide with SP Flash Tool

SP flash tool is the best firmware flashing tool available online whether it is custom ROM or stock ROM. Using SP Flash Tool, you can flash Xiaomi Redmi 9T Android device (but make sure to check if it is based on Mediatek IC). Flash any custom or stock ROM over Xiaomi Redmi 9T Android device. Also, do make sure that you have installed Xiaomi Redmi 9T USB drivers properly on your PC before flashing any firmware file.

Find your Xiaomi Redmi 9T USB drivers by using the search below:

You can download SP Flash Tool from our website downloading section. Also, you need to download the scatter file for your MB-based device.

Let me tell you what we can do with the SP Flash tool

  • 1. We can flash to android stock Rom
  • 2. Easily Flash custom ROM
  • 3. Application for fixing bricked or unbrick the device
  • 4. Easy to read, write parameters
  • 5. We can erase, format data, and reset your MTC-based devices

Pre-requisites before flashing Xiaomi Redmi 9T:

  • The battery should be charged up to 70%
  • Make sure you have a Xiaomi Redmi 9Ts USB cord available
  • Download and install the SP Flash tool on a PC
  • Since SP flash tool we need to install MediaTek USB drivers
  • Download Xiaomi Redmi 9T firmware file (Scatter file + files to be flashed)
  • Last but not the least, you need to take your device backup (for safety reasons)
  • Once you have all the things ready above, follow the rest of the flashing tutorial

Here are the Requirements For SP Flash Tool

  • 1. You have a Pc or Laptop
  • 2. You need a USB data cable for the device
  • 3. Drivers download (MediaTek USB-VCOM drivers)
  • 4. Download Scatter files and files to be flashed
  • 5. Note Backup the device (forum.hovatek.com/thread-468.html)
  • 6. SP Flash Tool Download

Steps to flashing Xiaomi Redmi 9T using SP flash tool

Follow the steps below to flash Xiaomi Redmi 9T with the SP flash tool:

Tecno Spark 7 Flashing Guide with SP Flash Tool

Download and install spflashtool.exe: Download the SP flash tool, spflashtool.exe

Download flash recovery image: FLashing is not easy, it takes time and patience. To flash Xiaomi Redmi 9T, make sure you have a flash recovery image ready for your device model.

Load scatters file: Click Scatter Loading (Load Scatter file of Xiaomi Redmi 9T).

Uncheck all boxes: Now, you should uncheck all boxes from the SP flash tool

Load Recovery Image: Tick-box, Go to / click the RECOVERY box from the list, and load the recovery image of your Xiaomi Redmi 9T device (load image from the separate window –>open)

Recovery box must be CHECKED: The recovery box is checked before you connect your Xiaomi Redmi 9T, in the recovery image location (uncheck all other boxes)

Turn off and connect Xiaomi Redmi 9T with the PC: Turn off Xiaomi Redmi 9T and connect it with the PC

Click the Download button:

Xiaomi Redmi 9T Flashing Guide with SP Flash Tool

After connecting your device with a PC, just click the download button on top

Step #9, click yes: If it asks click “yes”

Congratulations: Congrats! You have successfully flashed your Xiaomi Redmi 9T device

Disclaimer: Please follow the flashing tutorials at your own risk.


If the SP flash tool prompts a green circle, you are done. Xiaomi Redmi 9T has been flashed using the SP flash tool.

Leave a Reply

Your email address will not be published. Required fields are marked *